Buy 3D-printer AnyForm 1200-PRO
One of the largest industrial high temperature 3D printers on market.
Build volume 1200×650×1200 mm allows to print big one‑piece model or print a small batch in one setup.
AnyForm PRO features
Built-in workstation — no need of external PC
Automatic plastic change — up to four 2.5 kg spools. Heated material chamber
Isolated heated chamber up to 300°С
High temperature extruder up to 500°С
Dual switching extruder allows to print with two different materials
Built-in UPS and video control system
Total Z — first company in Russia, which started serial production of industrial 3D printers.
Our engineers have achieved print performance to match high-tech industry demands. At the same time, Total Z printers are more affordable in comparison with competitors solutions.
Active heated isolated chamber and patented extruder allow to print with any materials available on market, including high performance PEEK, PEKK, Ultem 9085, Ultem 1010, PSU, PPSU, PEI, TERMAX.
Our engineers have achieved print performance to match high-tech industry demands. At the same time, Total Z printers are more affordable in comparison with competitors solutions.
Active heated isolated chamber and patented extruder allow to print with any materials available on market, including high performance PEEK, PEKK, Ultem 9085, Ultem 1010, PSU, PPSU, PEI, TERMAX.
AnyForm 1200-PRO specification
3D PRINTING
Технология печати
3D printing technology
Filament diameter
1.75/2.85 mm
Build volume (XYZ, mm)
1200×650×1200
Printhead
interchangeable (FDM/FGF)
Maximum extruder temperature
350°C (base model)
500°C (HOT+ version)
Maximum chamber temperature
100°C (base model)
300°C (HOT+ version)
Minimum layer height
0.05 mm (50 microns)
PHYSICAL CHARACTERISTICS
Outer dimensions (XYZ, mm)
3180×1520×2040
Weight, kg
2000 (variable)
POWER REQUIREMENTS
Requirements
380V, 3 phase
Max. power consumption
MATERIALS
Impact-resistant
ABS, ASA, SBS, PC
Design and eco-friendly
PLA, PETG, CERAMO. PLA-composites (wood, metal)
Flexible
TPU, FLEX, RUBBER, KAUCHUK ELASTIK
Soluble supports
HIPS, PVA
Castable
PMMA (CAST), WAX3D
Carbon and glass filled composites
TOTAL-TPU-CARBON, TOTAL-TPU-GLASS, TOTAL-SAN-AIR, TOTAL-ABS-GLASS, TOTAL-ABS-GLASS-TITAN, PETG CF
Wear-resistant
Nylon, Polyketone, PP
High-performance (for HOT+ version only)
Ultem 9085, Ultem 1010, PEEK, PEKK, PSU, PPSU, PEI, composites based on them
Other AnyForm PRO solutions
AnyForm 450-PRO
The most compact and affordable model among PRO series industrial 3D printers.
Build volume 450×450×450 mm is appropriate for the majority of engineering tasks.
Build volume 450×450×450 mm is appropriate for the majority of engineering tasks.
AnyForm 500-PRO
Compact and mobile industrial 3D‑printer — goes through a standard office doorway from 900 mm.
Build volume up to 500 mm (XYZ).
Build volume up to 500 mm (XYZ).
AnyForm 650-PRO
Build volume 650×500×650 mm.
When you need more build volume in limited space or have specific power requirements.
When you need more build volume in limited space or have specific power requirements.
AnyForm 950-PRO
Allows building 3D models up to 950×650×950 mm.
Vacuum table for easy print removal and built‑in video control system for quality control throughout the whole printing process.
